THIS BULLETIN CANCELS AND SUPERSEDES DEALER SERVICE BULLETIN NO. 93-95-7A, DATED FEB. 1993. THE TRANSMISSION SIZE HAS BEEN CORRECTED. ALL COPIES OF 93-95-7A SHOULD BE DISCARDED.
1993 HYDRA-MATIC 4L60-E (M30)
All
C/K - Trucks Under 8600 GVW S/T - Trucks 4.3L Non-Turbo M/L and G Vans
New Product Information for 1993 HYDRA-MATIC 4L60-E transmissions. This information has been updated since publication of the 1993 Service Manual and should be noted accordingly. Be certain to familiarize yourself with these updates to properly repair the 1993 HYDRA-MATIC 4L60-E transmission.
DATE OF PRODUCTION CHANGE: (Figure 1 and 2) ------------------------------------------- Beginning with Start of Production 1993, HYDRA-MATIC 4L60-E transmissions were built with solid stator shaft seals (230).
Update your 1993 Service Manual with the following three (3) pages 7A-14B-43, 7A-14B-45 AND 7A-14B-46.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.