GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Chevy P42 Commercial Chassis 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Steering Column Lock Cylinder Set - Assemble - Off Vehicle

Steering Column Lock Cylinder Set - Assemble - Off Vehicle Column Shift

Assembly Procedure

    Object Number: 354104 Size: SH
  1. Install the steering column lock cylinder set (1) into the lock housing cover assembly.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the lock retaining screw (2) into the lock housing cover assembly.

    3. Tighten
    Tighten the lock retaining screw (2) to 2.5 N·m (22 lb in).

  3. Install the turn signal switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle .

Steering Column Lock Cylinder Set - Assemble - Off Vehicle Floor Shift

Assembly Procedure

    Object Number: 354104 Size: SH
  1. Install the steering column lock cylinder set (1) into the lock housing cover assembly.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the lock retaining screw (2) into the lock housing cover assembly.

    3. Tighten
    Tighten the lock retaining screw to 2.5 N·m (22 lb in).

  3. Install the turn signal switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle .