GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Chevy P42 Commercial Chassis 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Hazard Warning Switch Replacement

Removal Procedure

    Object Number: 215645 Size: SH
  1. Remove the screw (1).
  2. Remove the button (2).
  3. Remove the spring (3).
  4. Remove the knob (4).

Installation Procedure

    Object Number: 215645 Size: SH
  1. Install the knob (4).
  2. Install the spring (3).
  3. Install the button (2).

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the screw (1).

    5. Tighten
    Tighten the screw to 0.7 N·m (6 lb in).