1. Remove the pivot pin (2) from the bowl assembly.
2. Remove the shift lever (3) from the bowl assembly.

Ensure that you do not lose the spring (5) or the insulator (6).

3. Remove the insulator (6) from the shift lever (3).
4. Remove the spring (5).

Use a shim as a guide if you experience problems while installing the shift lever over the spring.

1. Install the spring (5).
2. Install the shim over the top of the spring.
3. Install the insulator (6).
4. Install the shift lever (3).
5. Install the pivot pin (2).
6. Remove the shim.
7. Ensure that the shift lever positively engages the shift gate in all positions.