| | Important: Replace worn, damaged or broken steering linkage components. Do not
attempt to repair damaged or broken components by welding.
|
| • | Inspect the relay rod and the tie rod ends for the following conditions
at the ball stud: |
| • | Excessive up-and-down motion |
| • | Refer to the appropriate procedure: |
| • | Inspect for a shimmy condition at the idler arm. Measure the deflection.
Refer to
Idler Arm Inspection
. |
| • | Inspect for a shimmy condition and/or excessive rusting at the
following areas: |
| • | Refer to the appropriate procedure: |
