For 1990-2009 cars only
- Remove the adjusting hole cover in the backing plate.
- Adjust the adjusting screw until the wheel can just be turned by hand. The brake drag should be equal at both wheels.
- Back off the adjusting screw 3 notches.
- Install an adjusting hole cover in the backing plate.
- Check the parking brake adjustment. Refer to Park Brake Cable Service/Adjustment in Parking Brake.
Important: The brakes should have no drag after the screw has been backed off about 15 notches. If a heavy drag is present, refer to Park Brake Cable Service/Adjustment in Parking Brake.
