Harness Routing Views P42

Whenever moving any of the wiring, replace the wiring in the original position. Whenever moving the harnesses in order to reach a component, ensure that all the harnesses are routed correctly. Replace broken clips or retainers. Electrical problems can result from loose wiring or harnesses which shift from the original positions, or which are routed incorrectly.

Figure 1:	Forward Lamps Harness (Typical)
Figure 2:	Electronic Brake Control Module (EBCM)
Figure 3:	Engine Wiring Diesel- LH Front Of Bulkhead, Front View
Figure 4:	Engine Wiring (Gasoline), LH Front
Figure 5:	Engine Wiring 4.3L, Upper RH Forward
Figure 6:	Engine Wiring--5.7L Upper Right Hand Side View
Figure 7:	Engine Wiring 5.7L, Lower RH Side
Figure 8:	Automatic Transmission, Upper LH Rear
Figure 9:	P/B Booster Warning System Wiring (School Bus) Engine View (Typical)
Figure 10:	IP Side of Engine Wiring -- All Engines (P42)
Figure 11:	IP Side of Engine Wiring--Diesel--Forward View
Figure 12:	Rear Lamps Extension, LH Side View
Figure 13:	Rear Lamps Typical (Body Builder Installed)

Harness Routing Views P32

Whenever moving any of the wiring, replace the wiring in the original position. Whenever moving the harnesses in order to reach a component, ensure that all the harnesses are routed correctly. Replace broken clips or retainers. Electrical problems can result from loose wiring or harnesses which shift from the original positions, or which are routed incorrectly.

Figure 1:	Electronic Brake Control Module (EBCM)
Figure 2:	Radiator Support Wiring (L65)
Figure 3:	Engine to Dash and Steering Column (Forward View)
Figure 4:	Engine to Dash and Steering Column
Figure 5:	Dash and Steering Column
Figure 6:	Engine Wiring Harness Rear (L29)
Figure 7:	Engine Left Side (L65)
Figure 8:	Engine And Transmission Harness
Figure 9:	Auto Apply Park Brake Components (P32)
Figure 10:	Rear Lamp Harness Wiring