Important: Ensure that the transmission is in the mechanical park position prior to removing the shift cable from the vehicle. The transmission control lever can be positioned to mechanical park by rotating the control lever clockwise until it reaches its full clockwise stop position.

Important: Ensure that the column shift lever and the transmission control lever are in the mechanical park position prior to installing the shift cable to the vehicle. The transmission control lever can be positioned to the mechanical park position by rotating the control lever clockwise until it reaches its full clockwise stop position.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Tighten
Tighten the nut that secures the shift cable and clip to the transmission cable bracket to 6 N·m 53 lb in).

Tighten
Tighten the bolts and nuts that secure the shift cable to the frame rail to 10 N·m 53 lb in).