Important: Do not remove the ignition coils from the valve rocker arm cover unless
required.
Do not remove the oil fill tube from the cover unless service is required.
If the oil fill tube has been removed from the cover, install a NEW
tube during assembly.
- Remove the ignition coil bracket bolts from the rocker arm cover, if
required.
- Remove the ignition coil and bracket assembly from the cover.
- Remove the valve rocker
arm cover bolts.
- Remove the valve rocker arm cover.
- Remove the gasket (1) from the cover.
- Discard the gasket.
The bolt grommets may be used
again if they are not damaged.
- Remove the oil fill cap
from the oil fill tube.
- Remove the oil fill tube, if required.
- Discard the oil fill tube.