D-Ring Bracket Crossmember Replacement Maintenance Body

Caution: Refer to Vehicle Lifting Caution in the Preface section.




1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information in 2005 C/K Truck Service Manual.
2. Remove the bolts (1) from both sides of the crossmember.
3. Remove the crossmember from the vehicle.

1. Install the crossmember on the vehicle and line up mounting holes.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bolts (1) on both sides of the crossmember.

Tighten
Tighten side bolts to 34-46 N·m (25-34 lb ft).

3. Lower the vehicle.