GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2002
🢒
Chevy K Silverado - 4WD
🢒
Steering
🢒
Steering Wheel and Column
🢒 Turn Signal Switch Housing - Assemble - Off Vehicle
Turn Signal Switch Housing - Assemble - Off Vehicle Tilt
Important:
The switch mounting bracket must be pressed firmly against the steering column tilt head.
Slide the turn signal switch housing onto the steering column shaft assembly.
Install the turn signal and multifunction switch assembly only. Refer to
Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle
.
Install the steering column tilt head components. Refer to
Steering Column Tilt Head Housing - Assemble - Off Vehicle
.
Enable the inflatable restraint steering wheel module. Refer to
Enabling the SIR System
in SIR.
Turn Signal Switch Housing - Assemble - Off Vehicle Standard
Important:
The switch mounting bracket must be pressed firmly against the steering column tilt head.
Slide the turn signal switch housing onto the steering column shaft assembly.
Install the turn signal and multifunction switch assembly only. Refer to
Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle
.
Install the turn signal cancel cam and upper bearing thrust. Refer to
Turn Signal Cancel Cam and Bearing Thrust Washer - Assemble - Off Vehicle
.
Enable the inflatable restraint steering wheel module. Refer to
Enabling the SIR System
in SIR.