GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1999 🢒 Chevy K Silverado - 4WD 🢒 General Information 🢒 General Information 🢒 Rear Brake Caliper Bracket Replacement

Removal Procedure
  1. Remove 2/3 of the brake fluid from the master cylinder.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Inspect the caliper operation. Refer to Brake Caliper Inspection .
  5. Remove the caliper. Refer to Rear Brake Caliper Replacement .
  6. Remove the caliper and mounting bracket from the backing plate. Refer to Rear Disc Brake Pads Replacement .

    7. Object Number: 369671 Size: SH
  7. Inspect the caliper and mounting bracket. Refer to Brake Caliper Inspection .

Installation Procedure

    Object Number: 369671 Size: SH
  1. Install the caliper mounting bracket to the backing plate assembly. Refer to

    2. Rear Disc Brake Pads Replacement .

  2. Install the caliper. Refer to Rear Brake Caliper Replacement .
  3. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Remove the safety stands.
  5. Lower the vehicle.
  6. Pump the brake pedal slowly and firmly in order to seat the brake pads.