J 24086-C Piston Pin Remover/Installer Set
Important:
• | Disassembly of the piston, press-fit design piston pin, and connecting rod may create scoring or damage to the piston pin and piston pin bore. If the piston, pin, and connecting rod have been disassembled, replace the components as an assembly. |
• | The disassembly procedure, as shown, is to be used for diagnostic purposes only. |
Notice: After the installer hub bottoms on the support assembly, do not exceed 35 000 kPa (5,000 psi) pressure, this could cause damage to the tool.