GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2006
🢒
Chevy C Silverado - 2WD
🢒
Accessories
🢒
Power Take-Off
🢒 Power Take-Off Switch Replacement
Removal Procedure
Remove the I/P cluster bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gages, and Console.
Pull out the switch housing from the I/P.
Disconnect the wire connector to the PTO switch.
Remove the PTO switch from the switch housing.
Installation Procedure
Install the PTO switch to the housing
Connect the wire connector to the switch.
Install the switch housing to the I/P till it clicks into place.
Install the I/P cluster bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gages, and Console.