CORRECTION-ALIGNMENT SPECS. 1988 C AND K TRUCKS

VEHICLES AFFECTED: 1988 C-K PICK UP TRUCKS

The front end alignment specifications shown on page 3A-8 of the 1988 C-K Pick-Up Truck Service Manual are incorrect. The correct specifications are as follows:

MODEL CAMBER CASTER TOTAL TOE (DEG.)

C-100, C-200, C-300 .5 +/- .5 3.75 +/- 1.0 .24 +/-.2 K-100, K-200 .9 +/- .5 4.0 +/- 1.0 .14 +/-.2 K-300 .75 +/-.5 4.0 +/- 1.0 .14 +/-.2

Vehicle must be jounced at least 3 times before checking alignment. Right and left toe should be set separately and equally per wheel, with steering wheel held in straight ahead position within +/- 5 degrees.

MAX. CROSS CAMBER (LEFT MINUS RIGHT) .5 DEGREE.

MAX. CROSS CASTER (LEFT MINUS RIGHT) 1.0 DEGREE.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.