Schematic Reference: Instrument Cluster Schematics

Did you perform the Instrument Cluster Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

1. Turn ON the ignition, with the engine OFF.
2. Measure the battery voltage and compare the voltage with the volt gage display in the IPC.

Does the volt gage indicate approximately the same value as the battery voltage?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Replace the IPC. Refer to Instrument Cluster Replacement .

Did you complete the replacement?

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2