GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Chevrolet C-Series Medium Duty Truck B7 🢒 Steering 🢒 Steering Wheel and Column 🢒 Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle

    Object Number: 354112 Size: SH
  1. Remove the tilt lever. Refer to Tilt Lever Replacement - On Vehicle .
  2. Remove the multifunction lever. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .
  3. Remove the hazard knob. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle .
  4. Remove the turn signal cancel cam assembly. Refer to Turn Signal Cancel Cam and Upper Bearing Inner Race - Disassemble - Off Vehicle .
  5. Remove the round washer head screw (2) from the signal switch arm actuator (3).
  6. Pry out the signal switch arm actuator (3) from the steering column housing assembly
  7. Remove the 3 binding head cross recess screws (1) from the turn signal switch assembly.

    8. Object Number: 354116 Size: SH
  8. In order to remove the turn signal switch assembly, use the following steps.
  9. Remove the steering column wire harness strap.
  10. Remove the wiring protector.

    11. Object Number: 343824 Size: SH
  11. Disconnect the terminal connector from the turn signal switch assembly connector.
  12. Remove the terminal connector from the dimmer switch assembly.
  13. Pull the turn signal switch assembly connector through the steering column, if needed.