|
Important: Twisted-pair wires provide an effective "shield" that helps protect
sensitive electronic components from electrical interference. Depending on
application, twisted-pair wires are used on wiring harnesses connecting
the following components:
| • | electronic brake control module (EBCM) |
| • | wheel speed sensor (WSS) |
| • | The wires must be twisted a minimum of 9 turns per 30.5 cm (12
in) as measured anywhere along the length of the wires. |
| • | The outside diameter of the twisted wires must not exceed 6.0 mm (0.236
in). |
Refer to
Splicing Twisted or Shielded Cable
in Wiring Systems.
| 
