Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Does the DMM indicate continuity? | -- | ||
2 |
Does the test lamp light? | -- | ||
3 | Connect a test lamp from the multifunction alarm module terminal A4 to ground while cranking the engine. Does the test lamp light? | -- | ||
4 |
Does the test lamp light? | -- | ||
5 | Replace the multifunction alarm module. Refer to Multifunction Alarm Module Replacement in Instrument Panel, Gages and Console. Is the repair complete? | -- | System OK | -- |
6 | Backprobe the inline fuse with a test lamp to ground Does the test lamp light? | -- | ||
7 | Repair the open in CKT 53 (YEL) between the inline fuse and the multifunction alarm module. Is the repair complete? | -- | System OK | -- |
8 | Repair the open in CKT 150 (BLK) between the multifunction alarm module and ground. Is the repair complete? | -- | System OK | -- |
9 | Repair the open in CKT 39 (PNK) between the instrument panel fuse block and the multifunction alarm module. Is the repair complete? | -- | System OK | -- |
10 | Repair the open in CKT 434 (ORN/BLK) between the starter relay and the multifunction alarm module. Is the repair complete? | -- | System OK | -- |
11 | Inspect for an open in CKT 1477 (PPL) between the generator and the inline fuse. Do you find an open? | -- | Go to 12 | Go to Generator Not Operating Properly in Engine Electrical |
12 | Repair the open in CKT 1477 (PPL) between the generator and the inline fuse. Is the repair complete? | - | System OK | - |
