GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Cavalier 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Instrument Panel Trim Panel Replacement - Right Side

Removal Procedure

    Object Number: 288285 Size: SH
  1. Open the instrument panel (IP) compartment door to access the RH IP trim panel (3).
  2. Remove the IP accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  3. Remove the screws (1) from the RH IP trim panel (3).
  4. Remove the RH IP trim panel (3) from the IP (2).

Installation Procedure

    Object Number: 288285 Size: SH
  1. Position the RH IP trim panel (3) to the IP (2).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the RH IP trim screws (1).

    3. Tighten
    Tighten the screws (1) to 3 N·m (27 lb in).

  3. Install the IP accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .
  4. Close the IP compartment door.