Removal Procedure
- Unlatch the rear seat back.
- Tilt the rear seat back forward 50 degrees.
- Unhook the rear seat outer retractor side belts from the rear
seat back.
- Remove the spacer (2)
at the right side key pin (3).
- Slide the rear seat back to the right .
- Disengage the left key pin (3) from the left key slot (4).
- Slide the rear seat back to the left.
- Disengage the right key slot (4) from the right key pin (3).
- Remove the rear seat back.
Installation Procedure
- Install the rear seat
back.
- Inspect the insulator (1) for proper installation.
- Replace the insulator (1) if the insulator is damaged or
missing.
- Slide the rear seat back to the left.
- Engage the right key slot (4) to the right key pin (3).
- Slide the rear seat back to the right.
- Engage the left key pin (3) to the left key slot (4).
- Install the spacer (2) at the right side key pin (3).
- Hook the rear seat outer retractor side belts to the rear seat
back.
- Latch the rear seat back.