Did you perform the Power Windows System Check?

--

Go to Step 2

Go to Power Windows System Check

1. Turn the ignition switch to the RUN position.
2. Place the rear window lockout switch in the OFF position.
3. Backprobe the master window switch harness connector C1. Use the J 39200 Digital Multimeter (DMM) in order to measure the voltage between terminal D and ground.

Does the voltage equal the specified value?

B+

Go to Step 3

Go to Step 4

1. Disconnect the left rear window switch.
2. Use the J 39200 DMM in order to measure the voltage between terminal F of the left window switch and ground.

Does the voltage equal the specified value?

B+

Go to Step 5

Go to Step 6

Replace the master window switch. Refer to Front Side Door Window Switch Replacement .

Did you complete the repair?

--

Go to Power Windows System Check

--

Replace the left rear window switch. Refer to Front Side Door Window Switch Replacement .

Did you complete the repair?

--

Go to Power Windows System Check

--

Repair the open in CKT 1307 between the master window switch and the left rear window switch. Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Power Windows System Check

--