Application | Specification | |
---|---|---|
Metric | English | |
Ball Joint to Steering Knuckle Nut to Install Cotter Pin (Maximum) | 65 N·m plus 180° rotation | 50 lb ft plus 180° rotation |
Ball Joint to Steering Knuckle Nut to Install Cotter Pin (Minimum) | 55 N·m plus 180° rotation | 41 lb ft plus 180° rotation |
Control Arm to Crossmember Bolts (Front Bushing) | 107 N·m | 79 lb ft |
Control Arm to Crossmember Bolts (Rear Vertical Bushing) | 170 N·m | 125 lb ft |
Front Suspension Crossmember Mounting Bolts | 110 N·m | 71 lb ft |
Front Suspension Support Brace Bolts | 17 N·m | 53 lb ft |
Hub and Bearing Assembly to Steering Knuckle Bolts | 95 N·m | 70 lb ft |
Strut Assembly to Body Bolt | 25 N·m | 18 lb ft |
Strut Assembly to Body Nuts | 25 N·m | 18 lb ft |
Strut Assembly to Steering Knuckle Nuts | 180 N·m | 133 lb ft |
Strut Nut to Strut Rod | 70 N·m | 52 lb ft |
Stabilizer Shaft Clamp | 66 N·m | 49 lb ft |
Stabilizer Shaft Link to Control Arm Nuts | 17 N·m | 13 lb ft |
Tie Rod End to Strut Nut | 20 N·m plus 180° rotation | 15 lb ft plus 180° rotation |