DRIVE AXLE TRI-POT SEAL CLAMP PART NUMBERS

MODEL AND YEAR: 1986 CAVALIER WITH L-4 ENGINE

For the 1986 model year, a limited quantity of 4-cylinder Cavalier vehicles with both automatic and manual transaxles have been built using a low-profile, earless Tri-Pot seal retaining clamp on the left-hand inboard axle joint.

These assemblies may be serviced with Seal Service Kit Tri-Pot 7845350 (which contains standard clamp 7843226), using J 35910 Drive Axle Seal Clamp Pliers. Refer to illustration.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.