COIL WIRE SERVICE IDENTIFICATION OF PROPER COIL

Model and Year: 1982-86 CAVALIER (VIN CODE G, P)

TO: ALL CHEVROLET DEALERS

When replacing the coil wire on the 1982-86 Cavalier with the 1.8L carbureted engine or the 2.0L fuel injected engines, the proper P/N wire must be used to insure proper engagement of the terminal and sealing against contamination, (See Illustration attached).

Part Number Model Year ----------- ---------- 12036900 1982 - 84

12036972 1985 - 86

NOTICE: If the 1982-84 part is used on the 1985-86 models, the boot will be too long on the distributor end and may not allow proper terminal engagement. Also, the boot will be too short on the coil end and a poor seal against contamination may result.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.