Poor or Rough Idle, Lack of Power or Malfunction Indicator Lamp (MIL) On, EVAP Hose Worn (Inspect for Presence of EVAP Hose Retaining, Install Clip, and/or Replace EVAP Hose)
| Subject: | Poor or Rough Idle, Lack of Power, or Malfunction Indicator Lamp (MIL) On, EVAP Hose Worn (Inspect for Presence of EVAP Hose Retaining Clip, Install Clip, and/or Replace EVAP Hose) |
| Models: | 2007 Chevrolet Captiva, Captiva Maxx (Export Only) |
| with 3.2L V-6 Engine (RPO LU1) |
Condition
Some customers may comment on poor or rough idle, lack of power, an illuminated MIL or a worn evaporative emission system (EVAP) hose in the engine compartment.
Cause
An EVAP hose retaining clip may not be present, which may allow the EVAP hose to rub against a metal bracket. A worn EVAP hose may cause poor idle, lack of power, or an illuminated MIL.
Correction
Dealers should inspect for the presence of the EVAP hose retaining clip (1).
If the clip is not present, install a new clip, P/N 96629450.
Also inspect the EVAP hose for signs of wear. If the EVAP hose is already worn, replace the EVAP hose with a new hose.
Parts Information
Part Number | Description |
|---|---|
96629450 | Clip, Evaporative Emission Control Hose |
Warranty Information
For vehicles repaired under warranty, use:
Labor Operation | Description | Labor Time |
|---|---|---|
R617040* (GMDAT) | Install Clip - Evaporative Emission Control Hose | 0.2 hr |
J7916* (WINS) | ||
1730700 (GMDAT) | Hoses, Evaporative Emission Control - Repair or Replace | 0.3 hr |
J6982 (WINS) |
*This labor operation is for bulletin use only. The number will not be published in the Labor Time Guide.
