INFORMATION ON BODY MOUNT ASSEMBLY DESIGN CHANGE. Chevrolet Caprice 1994

---------------------------------------------------------------------- INFORMATION ----------------------------------------------------------------------

SUBJECT: BODY MOUNT ASSEMBLY DESIGN CHANGE

MODELS: 1994 CHEVROLET CAPRICE WITH RPO'S FE1, FE2, FE3, FE4 OR F41

THIS BULLETIN IS BEING ISSUED TO CLARIFY AN INTERIM BODY MOUNT ASSEMBLY DESIGN CHANGE AFFECTING CERTAIN MOUNT LOCATIONS WITH RPO FE1, FE2, FE3, FE4 OR F41 SUSPENSION LEVELS AND ASSEMBLED AFTER VIN BREAKPOINT RR 138000.

THE DESIGN CHANGE TO THE BODY MOUNT ASSEMBLY ELIMINATES THE BODY BOLT LOWER CUSHION ASSEMBLY AND REPLACES IT WITH A FLAT METALLIC RETAINER/WASHER AT THE 1, 2 AND 3 MOUNT POSITIONS.

FIGURES: 1 ATTACHMENTS: 0

Object Number: 85143 Size: FS

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.