Tools Required

J 43244 Relay Puller Pliers

1. Remove the cover from the number 1 underhood electrical center.
2. Using the J 43244 remove the relay from the underhood electrical center. Refer to Electrical Center Identification Views in Wiring Systems.

Notice: Installation of the proper relay is critical. If an enhanced relay -- equipped with a diode -- is installed into a position requiring a standard relay -- equipped without a diode -- excessive current will damage any components associated with the relay or its associated circuits.

1. Install the cooling fan relay to the underhood electrical center. Refer to Electrical Center Identification Views in Wiring Systems.
2. Install the cover to the number 1 underhood electrical center.