Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Do the hazard lamps and the turn signal lamps flash? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Test for and repair a poor connection at C216. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and repair a poor connection? | -- | Go to Step 5 | Go to Step 4 |
4 | Replace the turn/hazard switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle and Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle in Steering Wheel and Column - Tilt. Did you complete the replacement? | -- | Go to Step 5 | -- |
5 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
