Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform the Diagnostic System Check? | -- | Go to Step 2 | |
2 | Turn the hazard lamp switch on. Do the hazard lamps flash? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the test lamp flash off and on? | -- | Go to Step 4 | Go to Step 5 |
4 | Replace the turn/hazard switch assembly. Refer to Hazard Warning Switch Replacement in Steering. Did you complete the replacement? | -- | Go to Step 10 | -- |
5 | Connect a test lamp between the hazard lamp flasher terminal B and ground. Refer to Circuit Testing in Wiring Systems. Does the test lamp flash off and on? | -- | Go to Step 6 | Go to Step 7 |
6 | Repair a poor connection or an open in the signal circuit of the hazard flasher. Refer to Wiring Repairs or Connector Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 10 | -- |
7 | Connect a test lamp between the hazard lamp flasher terminal A and ground. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | -- | Go to Step 8 | Go to Step 9 |
8 | Replace the hazard lamp flasher. Refer to Hazard Lamp Flasher Replacement . Did you complete the replacement? | -- | Go to Step 10 | -- |
9 | Repair a poor connection or an open in the battery positive voltage circuit of the hazard lamp flasher. Refer to Wiring Repairs or Connector Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |