I/P CLUSTER TRIM BEZEL 'ITCHING/ETCHING'. Chevrolet Camaro 1993

SUBJECT: I/P CLUSTER TRIM BEZEL "ITCHING" AND "ETCHING" (REPLACE CLUSTER TRIM PANEL ASSEMBLY)

MODEL: 1993-94 CHEVROLET CAMARO

CONDITION:

SOME CUSTOMERS MAY COMMENT ON A "ITCHING" TYPE NOISE FROM THE INSTRUMENT PANEL CLUSTER TRIM BEZEL AND/OR AN "ETCHING" CONDITION AT THE SAME LOCATION.

NOTE: ITCHING - SHORT SQUEAKING; PLASTIC ON PLASTIC NOISE. ETCHING - MARKS ON/IN FINISHED SURFACES.

CORRECTION:

REPLACE I/P CLUSTER TRIM PANEL ASSEMBLY WITH P/N 16754491.

1. FOLLOW INSTRUCTIONS IN THE 1994 SERVICE MANUAL, SECTION 8C.

PART AVAILABILITY:

PARTS ARE CURRENTLY AVAILABLE FROM GMSPO.

WARRANTY INFORMATION:

FOR VEHICLES REPAIRED UNDER WARRANTY, USE: LABOR OPERATION: C2460 USE PUBLISHED LABOR OPERATION TIME.

FIGURES: 0

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.