FLUIDIC WINDSHIELD WASHER NOZZLE SHIMS ADJUSTMENT

Fluidic washer nozzles which spray fluid too low or too high on the windshield can be adjusted using wedge-type shims. These shims are to be installed at the nozzle mounting bracket and are available from WDDGM.

The part numbers for these shims are as follows:

Carline Part Number Remark -------- ----------- -------

Cavalier 10018029 For use to raise or lower spray pattern Celebrity 25512084 (+3 DEG) Raises spray pattern 25512083 (-3 DEG) Lowers spray pattern 25515467 (-6 DEG) Lowers spray pattern Camaro 10017941 ( 3 DEG) For use either way Chevrolet 25509649 ( 3 DEG) For use either way Citation 25512287 ( 3 DEG) For use either way

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.