GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Blazer - 4WD - RHD 🢒 Body and Accessories 🢒 Doors 🢒 Power Window Inoperative - Right Side Rear from Right Side Rear Switch

Step

Action

Value(s)

Yes

No

1

Did you perform the Power Door Systems Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Power Door Systems

2

Verify that the RR power window is inoperative from the RR side window switch.

Do the power windows operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

3
  1. Access the side window lockout switch connector.
  2. Turn the ignition switch to the RUN position.
  3. Connect a digital multimeter (DMM) to CKT 1001 (DK GRN), terminal D at the side window lockout switch connector and ground.
  4. Test for voltage. Refer to Circuit Testing in Wiring Systems.

Is ignition voltage present?

B+

Go to Step 4

Go to Step 6

4
  1. Turn the ignition switch to the RUN position.
  2. Place the side window lockout switch in the NORMAL (UNLOCKED) position.
  3. Connect a DMM to CKT 1307 (DK BLU), terminal B at the side window lockout switch connector and ground.
  4. Test for voltage. Refer to Circuit Testing in Wiring Systems.

Is ignition voltage present?

B+

Go to Step 5

Go to Step 8

5
  1. Access the RR side window switch.
  2. Turn the ignition switch to the RUN position.
  3. Place the side window lockout switch in the NORMAL (UNLOCKED) position.
  4. Connect a DMM to CKT 1307 (DK BLU), terminal B at the RR side window switch connector and ground.
  5. Test for voltage. Refer to Circuit Testing in Wiring Systems.

Is ignition voltage present?

B+

Go to Step 9

Go to Step 7

6

Locate and repair the open or the high resistance in CKT 1001 (DK GRN). Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Step 10

--

7

Locate and repair the open or the high resistance in CKT 1307 (DK BLU). Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Step 10

--

8

Replace the side window lockout switch.

Is the repair complete?

--

Go to Step 10

--

9

Replace the RR side window switch. Refer to Front Side Door Window Switch Replacement .

Is the repair complete?

--

Go to Step 10

--

10

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3