GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Did you perform the Power Door Systems Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Power Door Systems

2

Verify that the power door locks switch is inoperative.

Does the power door lock switch operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

3

  1. Disconnect the door lock and side window switch that is not functioning.
  2. Connect a test lamp between the door lock and side window switch connector terminal D, CKT 840 (ORN) and battery ground.

Did the test lamp light?

--

Go to Step 5

Go to Step 4

4

Repair the open in CKT 840 (ORN). Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Step 6

--

5

Replace the door lock and side window switch. Refer to Front Side Door Window Switch Replacement .

Is the repair complete?

--

Go to Step 6

--

6

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3