Step | Action | Values | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Remote Keyless Entry Diagnostic System Check? | -- | ||
2 | Verify that the remote keyless entry is inoperative. Does the remote keyless entry operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |
3 | Depress the RH door lock switch to the lock position. Do all door locks function? | -- | ||
4 | Does one door lock function? | -- | Go to Power Door Lock Inoperative - Right Side Front in Doors | Go to Power Door Locks - Lock Inoperative Unlock Operates in Doors |
5 | Depress the RH door lock switch to the unlock position. Do all door locks unlock? | -- | ||
6 | Does one door lock unlock? | -- | Go to Power Door Lock Inoperative - Right Side Front in Doors | Go to Power Door Locks - Lock Inoperative Unlock Operates in Doors |
7 |
Do the doors lock then unlock? | -- | ||
8 |
Do the doors lock then unlock? | -- | ||
9 |
Does the test lamp light? | -- | ||
10 | Locate and repair the open in CKT 1140 (ORN) between the TBC fuse, located in the underhood fuse block and the remote control door lock receiver terminal 1. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
11 | Connect a digital multimeter (DMM) from terminal 4 to ground and check for continuity. Is there continuity? | -- | ||
12 | Locate and repair the open in CKT 451 (BLK/WHT) between the remote control door lock receiver terminal 4 and G105. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
13 | Using a DMM, measure the voltage from terminal 2 to ground. Refer to Circuit Testing in Wiring Systems. Is the voltage vary within the value indicated? | 1-10 V | ||
14 |
Is the wire open? | -- | ||
15 | Locate and repair the open in CKT 461 (ORN) between the BCM and the remote control door lock receiver terminal 2. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
16 | Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Is the repair complete? | -- | -- | |
17 | Replace the remote control door lock receiver. Refer to Receiver Replacement . Is the repair complete? | -- | -- | |
18 | Replace the transmitters. Is the repair complete? | -- | -- | |
19 |
Is the repair complete? | -- | -- | |
20 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
