Did you perform the Lighting Systems Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Lighting Systems

Verify that the right turn signal indicator is always on.

Do the turn signal indicators operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Turn the ignition switch to the RUN position.
2. Place the multi-function lever in the right turn position.
3. Observe the RF and RR turn signal lamps.

Do the right turn signal lamps operate correctly?

--

Go to Step 4

Go to Turn Signal Lamps Inoperative - Left or Right Side

Replace the instrument cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console.

Is the repair complete?

--

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3