Name | Location | Locator View | Connector End View |
|---|---|---|---|
Ambient Air Temperature Sensor (DIDM) | Front center of vehicle, front of the hood latch | ||
Body Control Module (BCM) | Lower rear of the IP, on the heater | Body Control System Component Views in Body Control Systems | -- |
Body Control Module (BCM) Connector C2 (24 Cavities) | Lower rear of the IP, on the heater | Body Control System Component Views in Body Control Systems | Body Control System Connector End Views in Body Control Systems |
Driver Information Display Module | Front overhead console in the passenger compartment | -- | |
Driver Information Display Module Connector C1 (6 Cavities) | Front overhead console in the passenger compartment | ||
IP Fuse Block | RH of the IP, near the door jamb switch, RF | Instrument Panel, Gages, and Console Component Views in Wiring Systems | Instrument Panel, Gages, and Console Connector End Views in Wiring Systems |
Underhood Fuse Block | On the top of the right inner wheelwell | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 Cavities) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 Cavities) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (VCM) | LH of the engine compartment | Engine Controls Component Views in Engine Controls | -- |
Vehicle Control Module (VCM) Connector C4 (24 Cavities) | LH of the engine compartment | Engine Controls Component Views in Engine Controls | VCM Connector End Views in Engine Controls |
C106 (8 Cavities) | At the forward lamp to body harness, inside the right front fender near the underhood fuse block | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 (116 Cavities) | The body harness to the IP harness, to the left of the IP | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C209 (16 Cavities) | Body harness to dome harness, LH front of the IP | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C610 (22 Cavities) | At the body harness to right front door harness, near the P600 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G105 | (CKT 451) At the engine harness, to the left rear of the cylinder head | Power and Grounding Component Views in Wiring Systems | -- |
P100 | At the IP bulkhead pass-through, to the right rear of the engine compartment, on the cowl | Harness Routing Views in Wiring Systems | -- |
S152 | (CKT 351, CKT 451) At the engine harness, between the breakouts for the left rear and the right rear engine block grounds, 15 cm (5.9 in) from the breakout to the right rear engine grounds | Power and Grounding Component Views in Wiring Systems | -- |
S205 | (CKT 1220) At the IP harness, between the breakouts for the instrument cluster connector and BCM connector C3, 6.5 cm (2.6 in) from the breakout to the BCM connector | Harness Routing Views in Wiring Systems | -- |
S206 | (CKT 1220) At the body harness, between the breakouts for the BTSI and to the automatic transmission indicator lamp, 9.5 cm (3.8 in) from the breakout to the transmission indicator lamp | Harness Routing Views in Wiring Systems | -- |
S207 | (CKT 817) Body harness 32.5 cm (13 in) from the BCM connector breakout toward the C211 steering column harness connector | Harness Routing Views in Wiring Systems | -- |
