Name | Location | Locator View | Connector End View |
|---|---|---|---|
Body Relay Block | RH of the IP, left of the IP Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Data Link Connector (DLC) | Lower RH of the IP | Data Link Communications Component Views in Data Link Communications | Data Link Communications Connector End Views in Data Link Communications |
Engine Oil Pressure Gauge Sensor | Below distributor | ||
Instrument Cluster | In the IP, ahead of the steering column | ||
IP Fuse Block | RH of the IP, near the side door jamb switch | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block | On the top of the right inner fenderwell | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 Cavities) (Body) | Below the Underhood Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 Cavities) (Engine) | Below the Underhood Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (VCM) (4.3L Engine) Connector C2 Red (32 Cavities) | LH of the engine compartment | Engine Controls Component Views in Engine Controls - 4.3L | VCM Connector End Views in Engine Controls - 4.3L |
Vehicle Control Module (VCM) (4.3L Engine) Connector C4 (24 Cavities) | LH of the engine compartment | Engine Controls Component Views in Engine Controls - 4.3L | VCM Connector End Views in Engine Controls - 4.3L |
C101 (8 Cavities) | Engine harness to body harness, LH of the engine compartment, near the VCM | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 (116 Cavities) | Body harness to IP harness, to the left of the IP | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G105 | (CKT 451) Engine harness, LH Rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G200 | (CKT 1850) Body harness, to the LF of the IP, above P100 | Harness Routing Views in Wiring Systems | -- |
G202 | (CKT 1850) Body harness, to the LF of the IP, above P100 | Harness Routing Views in Wiring Systems | -- |
P100 | IP bulkhead pass-through, RH rear of the engine compartment, on the cowl | Harness Routing Views in Wiring Systems | -- |
S201 | (CKT 1807) Body harness, 13 cm (5.12 in) from the BCM connector breakout toward C211 | Harness Routing Views in Wiring Systems | -- |
S205 | (CKT 1220) IP harness, between the breakouts for the instrument cluster and BCM connector C3, 6 cm (2.56 in) from the breakout to the BCM | Harness Routing Views in Wiring Systems | -- |
S209 | (CKT 1850) Body harness, 6.5 cm (2.56 in) from the BCM connector toward C211 | Harness Routing Views in Wiring Systems | -- |
S223 | (CKT 300) At the IP harness, near the IP fuse block, in the breakout, 8 cm (15 in) from C217 | Harness Routing Views in Wiring Systems | -- |
S224 | (CKT 451) IP harness, between the breakouts for the BCM C3 and the radio connector, 19.5 cm (7.68 in) from the BCM C3 breakout | Harness Routing Views in Wiring Systems | -- |
S287 | (CKT 340) IP harness, between the breakouts for the BCM C3 and the radio connector, 9 cm (3.54 in) from the radio connector breakout | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP203 | (CKT 1050) IP harness, on the IP, in front of the ashtray, strapped to the Body Harness | Harness Routing Views in Wiring Systems | -- |
