Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the cigar lighter/auxiliary outlets circuit description and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify that the auxiliary outlets are inoperative. Do the auxiliary outlets operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Connect a test lamp from CKT 1040 (ORN) at the auxiliary power tray to ground. Does the test lamp light? | -- | Go to Step 5 | Go to Step 4 |
4 | Locate and repair the open in CKT 1040 (ORN) between the IP fuse block and the auxiliary power tray. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 8 | -- |
5 | Connect the test lamp from CKT 1040 (ORN) to CKT 1850 (BLK) at the auxiliary power tray. Does the test lamp light? | -- | Go to Step 6 | Go to Step 7 |
6 | Replace the auxiliary power tray. Is the repair complete? | -- | Go to Step 8 | -- |
7 | Locate and repair the open in CKT 1850 (BLK) between the auxiliary power tray and ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
