GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Blazer - 4WD - RHD 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Parking Brake Rear Cable Replacement

Removal Procedure
  1. Release the park brake.
  2. Raise the vehicle and support the vehicle with safety stands. Refer to Lifting and Jacking the Vehicle in General Information.

    3. Object Number: 109 Size: SH
  3. Loosen the front cable at the equalizer.

    4. Object Number: 328422 Size: SH
  4. Disconnect the front cable connector from the rear park brake cable.

    5. Object Number: 328493 Size: SH
  5. Disconnect the cable from the park brake lever at the rear axle.
  6. Unclip the park brake cables from the rear axle differential retainer.

    7. Object Number: 328642 Size: SH
  7. Route the cables through the cable bracket.
  8. Remove the rear park brake cable assembly.

Installation Procedure

    Object Number: 328642 Size: SH
  1. Route the cables through the cable bracket.
  2. Connect the rear park brake cable to the lever.

    3. Object Number: 328493 Size: SH
  3. Install the cable to the park brake lever at the rear axle.
  4. Clip the park brake cables to the rear axle differential retainer.

    5. Object Number: 109 Size: SH
  5. Install the front cable at the equalizer.
  6. Adjust the park brake shoes. Refer to Parking Brake Shoe Adjustment .
  7. Adjust the park brake cable. Refer to Park Brake Cable Service/Adjustment .