Was the Hydraulic Brake System Diagnostic Check performed?

--

Go to Step 2

Go to Hydraulic Brake Diagnostic System Check

Inspect the disc brake pads and brake shoe linings for the following conditions:

Do any of the above conditions apply?

--

Go to Step 3

Go to Step 4

Replace the brake linings. Refer to Front Disc Brake Pads Replacement or Rear Disc Brake Pads Replacement in Disc Brakes.

Is the repair complete?

--

Go to Step 8

--

Inspect the brake rotors for the following conditions:

Refer to the appropriate procedure in Disc Brakes:

Do any of the above conditions apply?

--

Go to Step 5

Go to Step 6

1. Refinish the rotor. Refer to Brake Rotor Refinishing in Disc Brakes.
2. If refinishing the brake rotor results in a thickness that is less than the thinnest (Refinishing) thickness, replace the rotor. Refer to Front Brake Rotor Replacement or Rear Brake Rotor Replacement in Disc Brakes.

Is the repair complete?

--

Go to Step 8

--

Inspect brake assembly for loose, broken or missing attachments. Refer to Brake Pad Inspection in Disc Brakes.

Are there any loose, broken or missing attachments?

--

Go to Step 7

System OK

Tighten or replace the loose, broken or missing brake assembly components.

Is the repair complete?

--

Go to Step 8

--

Verify proper brake system operation.

Does the original condition still exist?

--

Go to Step 1

System OK