Removal Procedure
- Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Remove the left rear shield.
- Remove the canister retainer (1).
- Disconnect the vent hose (2) from the canister (1).
- Disconnect the fuel tank pipe and the purge pipe from the canister.
- Remove the EVAP canister.
Installation Procedure
- Install the EVAP canister.
- Connect the fuel tank pipe and the purge pipe to the canister.
- Connect the vent hose (2) to the canister (1).
- Install the canister retainer (1).
- Install the left rear shield.
- Lower the vehicle.