Removal Procedure
Tools Required
- Remove the brake drum and the wheel.
- Remove the axle shaft. Refer to
Axle Shaft Replacement
.
- Remove the seal. Use a seal removal tool behind the steel case
of the seal. Do NOT damage the housing.
- Remove the bearing. Use J 2619-O1
and J 22813-A
as shown. The tangs of the tool should engage the bearing
outer race.
Installation Procedure
Tools Required
• | J 23765 Axle
Shaft Bearing Installer |
• | J 23771 Axle
Shaft Seal Installer |
- Install the brake drum and the wheel.
- Install the bearing with J 23765
until the tool bottoms against the housing
shoulder.
- Lubricate the bearing with axle lubricant.
- Install the seal. Use J 23771
until the seal is flush with the axle tube.
- Lubricate the seal lips with axle lubricant.
- Install the axle shaft. Refer to
Axle Shaft Replacement
.