GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1996 🢒 Blazer - 4WD 🢒 Transmission/Transaxle 🢒 Clutch 🢒 Master Cylinder Replacement

Removal Procedure

    Object Number: 41449 Size: SH
  1. Remove the push rod from the clutch pedal.

    2. Object Number: 41514 Size: SH
  2. Remove the master cylinder from the cowl panel.

    3. Rotate the master cylinder body 45° clockwise.

  3. Raise and support the vehicle.

    4. Object Number: 33768 Size: SH
  4. Using J 36221, remove the clutch line from the concentric slave cylinder to depress the white plastic sleeve on the quick connect coupling to separate the clutch line from the concentric slave cylinder.
  5. Remove the master cylinder from the vehicle.

Installation Procedure
  1. Position the master cylinder to the vehicle.

    2. Object Number: 33768 Size: SH
  2. Install the clutch line into the concentric slave cylinder quick connect coupling.
  3. Lower the vehicle.

    4. Object Number: 41514 Size: SH
  4. Install the master cylinder to the cowl panel.
    5. • Hold the master cylinder at a 45° angle.
    • Rotate the master cylinder counterclockwise.

    Object Number: 41449 Size: SH
  5. Secure the push rod to the clutch pedal.
  6. Check the reservoir to ensure the oil level is at the full level. Use Delco Supreme® II Brake Fluid (GM P/N 1052535) or an equivalent.