GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2000
🢒
Blazer - 2WD
🢒
Body and Accessories
🢒
Doors
🢒 Front Side Door Window Switch Replacement
Removal Procedure
Remove the power window switch from the trim panel by using a flat-bladed tool in order to pry upward on the leading edge.
Disconnect the electrical connector from the switch.
Use a small screwdriver in order to press in the retainer springs.
Installation Procedure
Connect the electrical connector to the switch.
Install the power window switch to the trim panel by pressing down. Ensure that the retainers lock into place.