For 1990-2009 cars only
- Operate the engine until it comes to normal operating temperature.
- Stop the engine and raise the vehicle.
- Drain the fluid after removing the drain plug.
- Install the drain plug and tighten it securely after coating sealant.
- Remove the oil level plug and replenish the fluid until it begins to run out.
- Reinstall the oil level plug and tighten it securely.
Specifications
The coolant temperature is 80-90°C (176-194°F).
Caution: Refer to Vehicle Lifting Caution in the Preface section.
Specifications
| • | The fluid specification is 75W-85 (GL-4). |
| • | The fluid capacity is 2.1L (2.21 qt). |
