GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Alero Export 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Front Floor Console Armrest Replacement

Removal Procedure

    Object Number: 639912 Size: SH
  1. Raise the front floor console armrest.
  2. Remove the screws from the armrest hinge.

    3. Object Number: 639911 Size: SH
  3. Remove the armrest.
  4. If necessary, remove the hinge screws and the hinge from the armrest.

Installation Procedure

    Object Number: 639911 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. If necessary install the hinge to the armrest with the hinge screws.

    2. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  2. Install the armrest to the armrest hinge.

    3. Object Number: 639912 Size: SH
  3. Install the screws to the armrest hinge.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Lower the lower front floor console armrest.