GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front door upper trim panel. Refer to Front Side Door Trim Panel Insert Replacement .
  2. Remove the remote control from the outside rearview mirror remote control bezel (manual only). Refer to Remote Mirror Replacement .
  3. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  4. Disconnect the power mirror wire harness, if equipped.

  5. Object Number: 332795  Size: SH
  6. Remove the front door inner panel mirror insulator (3).
  7. Remove the outside rearview mirror nuts (2).
  8. Remove the outside rearview mirror (1).

Installation Procedure


    Object Number: 332795  Size: SH
  1. Install the outside rearview mirror.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the outside rearview mirror nuts (2). Tighten the nuts in the following order:
  4. 2.1. Top
    2.2. Forward
    2.3. Rear

    Tighten
    Tighten the nuts to 10 N·m (89 lb in).


    Object Number: 332797  Size: SH
  5. Install the front door inner panel mirror insulator (3).
  6. Connect the power mirror wire harness, if equipped.
  7. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  8. Install the remote control to the outside rearview mirror remote control bezel (manual only). Refer to Remote Mirror Replacement .
  9. Install the front door upper trim panel. Refer to Front Side Door Trim Panel Insert Replacement .