Removal Procedure
- Remove the instrument panel cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
.
- Disconnect the electrical connector from
the trip odometer and reset switch.
- Release the retainers on the trip odometer
and reset switch by using a small flat-bladed tool.
- Remove the trip odometer and reset switch
from the instrument panel cluster trim plate.
Installation Procedure
- Align the trip odometer and reset switch
to the instrument panel cluster trim plate.
- Install the trip odometer and reset switch
into retainers, by pressing into place until fully seated.
- Connect the electrical connector to the
trip odometer and reset switch.
- Install the instrument panel cluster trim plate. Refer to
Instrument Cluster Trim Panel Replacement
.