Removal Procedure
- Open the instrument panel (I/P) compartment door.
- Remove the retaining screws from the striker on the underside of the I/P carrier.
- Remove the striker from the I/P.
Installation Procedure
- Align the striker to the I/P, placing the striker ends at the holes in the underside of the I/P carrier.
Caution: Refer to Fastener Caution in the Preface section.
- Install the striker retaining screws and tighten to
1.9 N·m (17 lb in).
- Close the I/P compartment door and verify the operation of the latch to the striker.